The maintenance of the road cutting machine after construction is the key to ensuring its normal operation and extending its service life. Here are some specific maintenance steps and precautions:

1、 Cleaning work

1. Surface cleaning: After the construction is completed, the machine surface should be cleaned in a timely manner using brushes and cleaning agents, especially the dust, residue, etc. around the blades and on the machine base.

2. Cleaning of cutting disc: When cleaning the cutting disc, use clean water and a soft bristled brush to clean along the direction of the cutting disc, avoiding scratching with hard objects to prevent damage to the cutting disc. After cleaning, dry it with a dry towel or cloth.

2、 Inspection and adjustment

1. Blade inspection: Regularly inspect the blades for cracks, wear, or damage. If severe blade wear or cracks are found, they should be replaced in a timely manner to ensure cutting efficiency and machine safety.

2. Electrical system inspection: Check whether the power cord and plug are damaged, and whether the electrical system is working properly. Ensure that the wires are not exposed and the plugs are in good contact to avoid equipment shutdown or damage caused by circuit faults.

3. Control component inspection: Check whether the brake, clutch, throttle, water valve and other control components are flexible and reliable. If any abnormalities are found, they should be repaired or replaced in a timely manner.

3、 Lubrication and maintenance

1. Lubrication and maintenance: Regularly check and add lubricating oil to the cutting machine to ensure even friction between various components of the equipment and reduce wear and failure. Especially for wear prone parts such as guide rails and transmission components, special attention should be paid to lubrication and maintenance.

2. Storage and maintenance: When not in use, the road cutting machine should be placed in a dry and ventilated place, away from moisture and direct sunlight. Cleaning and maintenance should be carried out before storage to ensure that the equipment surface is free of dust and residue. Meanwhile, place the device on a stable surface and cover it with a dust-proof cloth to prevent dust and moisture.

4、 Other precautions

1. Safety protection: During maintenance, attention should be paid to safety protection measures, such as wearing gloves, goggles, and other protective equipment to avoid direct contact with sharp parts or electrical systems.

2. Recording and feedback: For each maintenance and repair, it is necessary to keep records and provide timely feedback. This helps to understand the operating status of the equipment, identify and solve problems in a timely manner.

In summary, the maintenance work of the road cutting machine after construction includes multiple aspects such as cleaning, inspection and adjustment, lubrication and maintenance, and other precautions. Regular maintenance and upkeep can ensure the normal operation and extend the service life of the road cutting machine.